How to Remove Kitchen Backsplash

How to Remove Kitchen Backsplash

Table of Contents


How to Remove Kitchen Backsplash
: A Step-through-Step Guide. When updating your kitchen often entails making modifications to various factors, and one of the regions which can have a sizable effect for your kitchen’s look is the backsplash. Whether you’re trying to update your antique backsplash with a new one or need a change in design, understanding how to do away with a kitchen backsplash is the first step. In this comprehensive guide, we’ll stroll you via the procedure of getting rid of a kitchen backsplash effectively and also correctly.

Tools and Materials You’ll Need

Before you start, acquire the important tools and substances to ensure a smooth backsplash elimination procedure. Here’s what you will want


  • Utility knife
  • Pry bar or putty knife
  • Screwdriver
  • Hammer
  • Safety goggles
  • Dust mask
  • Gloves
  • Drop cloth or plastic sheeting


  • Replacement drywall or backing fabric (if important)
  • Joint compound
  • Drywall screws
  • Drywall tape
  • Sandpaper

Step 1: Preparation

Firstly, start by getting ready the work area. Clear the countertops and also flow home equipment away from the wall in which the backsplash is located. Then cover your countertops and floor with a drop material or plastic sheeting to seize debris and protect surfaces.

Step 2: Remove Outlet Covers

Use a screwdriver to get rid of the covers of any electrical retailers or switches on the backsplash wall. Then turn off the energy to those outlets at the circuit breaker to make sure safety.

Step 3: Cut Caulk and Grout

When run a software knife along the edges of the backsplash in which it meets the wall and counter tops. This will assist break the seal of any caulk or adhesive maintaining the backsplash in location. Additionally, cut through any grout lines if your backsplash consists of tiles.

Step 4: Begin Removal

Starting from one nook, carefully insert a putty knife or pry bar in the back of the threshold of the backsplash. Gently observe strain to boost the backsplash away from the wall. If you encounter resistance, use the hammer to tap the pry bar or putty knife to create separation.

Step five: Gradual Removal

Work your manner alongside the backsplash, progressively lifting it off the wall. Be patient and take a while to keep away from unfavourable the drywall below.

Step 6: Repair Drywall

Once the backsplash is removed, you could want to repair the drywall below. If the drywall turned into broken all through removal or if you plan to alternate the backsplash format, reduce away any damaged sections and replace them with new drywall.

Step 7: Apply Joint Compound

Apply joint compound to the seams and any gaps within the drywall. Use drywall tape to cowl the seams, then follow a 2d layer of joint compound. Allow it to dry absolutely, and then sand it easy.

Step 8: Sand and Finish

Sand the drywall until it’s smooth and even. Once the surface is prepped, you could proceed along with your new backsplash installation or other wall remedies.

In Conclusion

While removing a kitchen backsplash is a plausible DIY project that could help give your kitchen a clean appearance. With the right equipment, materials, and cautious execution, you can efficaciously put off an vintage backsplash and put together the wall in your desired kitchen improve.

Frequently Asked Questions (FAQ)

Q1. Can I reuse the vintage backsplash?

  • While it is possible to reuse a few sorts of backsplash substances, it is able to no longer be really useful because of the risk of damage during elimination. Additionally, the adhesive won’t bond as efficiently the second time around.

Q2. Do I need to eliminate the countertop to eliminate the backsplash?

  • In most cases, you do not want to dispose of the countertop to put off the backsplash. You can carefully cut the caulk or adhesive seal between the backsplash and countertop, then continue with putting off the backsplash.

Q3. How do I understand if there is drywall damage in the back of the backsplash?

  • Inspect the wall in the back of the eliminated backsplash. If you be aware holes, cracks, or damage to the drywall, you’ll want to restore it before putting in a new backsplash.

Q4. What if I come upon stubborn adhesive or grout at some stage in removal?

  • If adhesive or grout is mainly cussed, you may use a warmth gun to soften it, making removal less complicated. Be careful not to overheat the area or damage the drywall.

Explore More Topics

Scroll to Top